Creating Creatures

This is a guide to creating your own creatures for the Tuxemon open source monster battling game. We are pretty tolerant of designs that vary from these specifications, and we're always happy to help out with advice and feedback.

You don't have to do all of these steps yourself! Just post whichever you feel like doing in the forum, and we might be able to find someone to help fill in the rest.

This page is about designing a creature from scratch. See Completing Creatures for advice on adding to monsters that have already been designed.

Introduction

In short, the way to contribute a monster to the project is to draw or paint it, or to create pixel art of it (a "sprite").

There are no particular requirements for drawings or paintings, because they are not used in the game. Pixel art is used in the game, and so it should be 64 pixels by 64 pixels, with the monster facing forward and to the right.

More details and advice is below, but feel free to just dive in and start creating some monsters!

Design

Tuxemon are cartoony monsters. Some are cute, while others are fearsome or mysterious.

One trick might looking at creatures from other monster battling games, and thinking about:

• What the creatures are based on: puns, obscure animals, animals with an elemental twist, etc.
• How they are represented: How detailed are they? How are complex concepts communicated in simple shapes? How cute are they? Is there a difference between basic monsters and their evolved forms?
• What is added to the monster to make it distinctive, appealing and iconic

blazeknight-94's tutorial describes six origins:

• Logical associations
• Shape associations
• Cliches
• Behavioural associations
• Famous character tributes
• Puns

FrozenFeather's eye chart could be useful.

Sources of inspiration:

• Phoenixdex Fakemon Concepts and Ideas
• The Ideadex

Mechanical Conceit

It is also possible to start your design from the other direction: choose a mechanical role that you want the creature to play in battle, and then design it from the bottom up.

This is the approach of the Create-a-Pokemon project.

Name

There are no hard-and-fast rules for names, but consider:

• Tuxemon on the same evolutionary chain often have similar names
• Names are often based on puns or references
• Names are often compounds of two different words

blazeknight-94's tutorial describes four naming conventions:

• Pure word associations
• Clever word associations
• Anagrams
• Saying misspellings

Type(s)

In Tuxemon, there are five types, and a tuxemon can belong to one or two of them.

• Fire: Includes creatures associated with energy, like electricity, light and heat, dragons and other legendary beings, and poison.
• Water: Includes creatures associated with the sea, lakes and swamps, ice and snow, the weather, liquids like blood, and fish and amphibians.
• Wood: Includes creatures associated with plants, lichen and fungi, poison and venom, forests, the natural environment, the wind and flying, and the wilderness.
• Earth: Includes creatures associated with the ground and underground, dirt and soil, mountains and rocks, caves, and ancient and buried things.
• Metal: Includes creatures associated with steel, light and darkness, mechanical and robotic things, psychic powers and other unnatural things, humankind, and the undead.

Evolutions

A creature can have any number of evolution options. However, it will typically not evolve more than twice. For example, Botbot can evolve into PiCC, B-ver.1, K9 or mRmOswitch. However, once it's evolved into one of those, it cannot evolve again.

An unevolved tuxemon is in its "basic stage". A tuxemon that has evolved once is in its "first stage"; if it has evolved twice, it is in its "second stage".

Morphing#Evolution_methods

Graphic Design

Although there is no direct use for illustrations in the Tuxemon game, artworks are excellent for developing the creatures, promoting the game, and serving as references during spriting.

There are many tutorials for drawing monsters. My preferred one is:

• NachtBeirmann's

Also useful are:

• Phatmon's
• JelloJolteon2000's
• imp709's video tutorial
• jesgrad07's
• oripoke's

Software

I use Krita, but others work in GIMP, Photoshop or other drawing software.

Sprites (Pixel Art)

With enough time and practice, anyone can make sprites. There are many free and open source tools available that you can use for creating sprites. Your first attempts at spriting may be met with criticism, but this criticism should be viewed constructively to help make your sprites better.

While there is a Default Palette that you can use, currently contributions do not have to use the default palette and many do not.

Sprites should be saved as PNG files. Do not save them as JPG files: they will lose quality. The PNG format is a lossless image format that will make sure that your images do not degrade in quality when you save them.

Software

I recommend Aseprite, but any painting program can be used.

Battle Sprites (Front and Back Sprites)

Front and back sprites are 64 by 64 pixels.

Light Source: Upper left corner.

Angle: The tuxemon should be facing the viewer, but at an angle so the left side of its body is also partly visible.

Techniques: Sel-out, Minimal Dithering, No Anti-Aliasing

Colour Palette: 16 colours, including white, almost-black and transparency.

Sizes

Although the total canvas is 64 by 64 pixels, only the largest tuxemon should fill up the entire space.

The smallest creatures should occupy about 40 by 40 pixels, with small-to-medium creatures occupying 48 by 48 and medium-to-large ones 56 by 56.

The back sprite should fill about about the same amount of the canvas as the front sprite does. Generally, the back sprite is of the head and shoulders.

The only edge that should be cut off is the bottom. For example, this sprite is incorrect because the left-hand-side is cut off:

Here is a corrected version:

Great sprites

Many great sprites have been submitted for Tuxemon. Here are some examples:

Dune Pincher by tamashihoshi. Notice how tamashihoshi didn't make the legs by copying one leg and using it multiple times. This should almost always be avoided, even for very small parts of the creature like eyes. In general, you should redraw each element.

Anu is very well put together by princess-phoenix. Because it's only a medium-sized creature, it doesn't take up the whole 64 by 64 pixels, only part of it. princess-phoenix has also made some parts more detailed and other parts less detailed: for example, the legs just end in points but the face is very complex. This suits the cartoony style of Tuxemon.

rsg167's Hoarse is dynamic and interesting.

tamashihoshi's Sumchon is cute, well-proportioned and takes a concept - a sumo wrestler insect - to its natural conclusion.

Spalding004's Dracune is the cocoon of a blood-sucking butterfly, so of course it looks like a vampire hanging upside with its cloak wrapped around it! A very clever design.

Leo's Duntree looks adorable, and has a lovely mix of colours. The leaf hat is a nice touch!

Tutorials

My preferred tutorial is:

• The-Godlings-Rapture

Other good ones include:

• blazeknight-94's
• Dragonfly Cave includes good basic skills on outlines, shading, etc.
• Chesu's spriting series
• SirAquakip's
• Oripoke/InvoluntaryTwitch's

Face Sprites

Face sprites are two frames of an animation, saved as two separate 24 by 24 pixel PNG files.

The face should fill most of the canvas, regardless of the size of the tuxemon.

The faces are animated, but it is okay for them to move by only a pixel or two. For example, to represent bobbing just move the image in the second sprite up by one pixel.

Generally, sel-out is not necessary for an image this size. A uniform almost-black outline is fine.

The light source, if one exists, should be by the top-left.

Typically, the face is drawn as if the creature were facing directly ahead, but the same angle that is used in the sprites (facing the left of the viewer) is also acceptable.

Examples

tamashihoshi's face sprites for Katapill are my favourite. It is an iconic face, with an obvious but appealing motion (the chomping of the mandibles) and the shading is really nice.

Face sprites don't have to be elaborate. Here, the animation is just moving one pixel up and then one pixel down, to reflect the bobbing motion of the floating Dandicub.

Rules

When you create a page for the monster on the wiki, you'll be prompted to provide other details:

• Species Name: A word or two that describes an aspect of a monster's nature. It is used in the format: "The X Tuxemon", like "The Flame Tuxemon" or "The Dark Forest Tuxemon". It's okay for multiple tuxemon - even unrelated tuxemon - to have the same species name.
• Body Shape
• Catch Resistance: Between 0 (impossible to catch) and 1 (standard chance of catching)
• Techniques (up to four, or leave blank for default techniques)

Distribution

When you've created your tuxemon (or part of it), you should:

• Upload any sprites and illustrations to the wiki
• Post about it on a new thread in the forums

You might also want to post it on r/fakemon or on DeviantArt. When I do this, I include a little link back to the project so we can promote Tuxemon.

Directly adding a monster to the Tuxemon game

The JSON files for a tuxemon to be used in-game are auto-generated from the wiki from time to time. You can also manually create a JSON file to get the monster in the game more quickly.

Upload the creature's JSON file to the `resources/db/monster` folder and the creature's four PNG sprites (two face sprites, front sprite, back sprite) to the `resources/gfx/sprites/battle` folder.

To test out your new creature in Tuxemon, you'll need to use the Tiled map editor to edit one of the existing maps in `resources/maps` and add an **event action** to add your new creature to your party! For more information on adding event actions and conditions to a map, check out the Map Editor Events page.

Now when you launch Tuxemon, get your newly created monster and enter combat to see them in action!